Plastic Pipe Cap

  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • Plastic Pipe Cap Manufacturers, Plastic Pipe Cap Factory, Supply Plastic Pipe Cap
  • video
Plastic Pipe Cap
  • FutureMould,FG17004
  • Black,Customized
  • Available(Mold&Product Design,Mold Manufacture)
  • Injection Molding
  • Customized(Product Assembly,Complete Packaging and Bulk) One-Stop Service
  • Credit Card,T/T,(FOB)

A variety of colors. Color is customized as you require.
A variety of product size. Product size is customized as you require, but the maximum length of product is no longer than 800mm.
3D printing. 3D printing service is provided that helps you get to know the final product from 3D samples.
A variety of surface treatments. You could choose polishing, texture, plastic electroplating, and etc.

Many areas have gradually started to use mechanized equipment for agricultural operations. From sowing to harvesting, many steps during planting have begun to use mechanized equipment. The application of the mechanized equipment males the entire crop production process more efficient. In many mechanized operations, the irrigation system needs to pave the corresponding pipelines and equipment in advance, and then carry out the related corresponding irrigation work in the appointed area.

plastic pipe cap

Different crops can adopt different irrigation methods, but the premise is that relevant water pipes need to be paved. The current irrigation pipeline has many improvements compared to the past. The application of plastic water pipes as the main water pipe is more convenient during installation and transportation. At the same time, when the irrigation watering can fitting used to connect the water pipes, it is more convenient to disassemble them without worrying about the difficulties due to corrosion.


In the process of connecting irrigation pipes, it can use different plastic pipe cap, this plastic pipe cap can be used as drain plug and diversion part. And the blocked part of the irrigation pipe can be removed next time for further extension, and the diversion uses tee joints and eyebrow normally.


This plastic pipe cap is a nozzle head. In the irrigation system, if there is a change in the irrigation area, it needs to change the position of the nozzle also. And if you need to set another new nozzle, you can use plastic pipe cap to block the water pipe at the original position. And the plastic pipe cap with the thread structure will not influence the whole structure of the water pipe, you only need to remove the head and replace it with the nozzle.

plastic pipe cap

The structure of the plastic pipe cap is a circular structure commonly used for irrigation connection and has built-in threads. There are white accessories in the middle. And there is much vertical protrusion on the outer wall structure of this irrigation watering can fitting. These small designs make the nozzle head more labor-saving during installation and disassembly, and these protrusions are helpful to the installation of this irrigation watering can fitting.


This plastic pipe cap consists of two parts. After the production is completed, it needs to insert the middle structural part into the external black parts by pressure to form a complete irrigation watering can fitting. Both parts are made of injection molding materials by injection process, and it has many choices on the raw materials, normally you can choose the suitable materials for processing according to the actual need or the costs of the materials. It should be noted that the injection shrinkage of the material and the accuracy requirements of the pipelines, otherwise, it would be extremely easy to cause the dimensional discrepancy. And normally we have a clear understanding that the plastic pipe cap should match the diameter of the pipe, if the size is not the same with fittings, the irrigation watering pipe fitting cannot be installed well.


Faq
Product Tag:
Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right