ArabPlast, which will be held at the Dubai World Trade Centre from 13 to 15 December 2023, is the leading trade fair for plastics, rubber, petrochemicals and packaging in the MENA region.

There are two main ways to control the injection molding temperature: barrel temperature control and mold temperature control.

A mold gating system is a network of channels that deliver molten plastic from the injection molding machine nozzle to the mold cavity. It is an important part of the injection molding process, as it affects the quality and efficiency of the molded parts.

Injection pressure is the pressure at which the molten plastic is injected in to a mold cavity. It is typically measured in tons per square inch(psi) or megapascals (MPa)

UV paint is a type of paint that cures or hardens when exposed to ultraviolet light. This type of paint is often used on plastic products, as it provides a durable and long-lasting finish that is resistant to fading, chipping.

In injection mold steel, quenching is the process of rapidly cooling a heated part in a quenching medium, such as water, oil, or air. This process can harden the steel and improve its strength.

In injection molding, sharp corners can cause a number of problems, including reduced strength, increased old complexity, increased manufacturing time, reduced surface finish.

If there is no exhaust system or the exhaust system is unreasonable in the mold, it will bring the following defects to the plastic products

After reviewing that the product design provide by the customer conforms to the molding manufacturing, the steps of mold design are as follows:

The production cycle of an injection mold project is generally 40 days, and the communication between the supplier and the customers in the beginning directly determines the progress of the project. The following are some details of the mold project. If this data is fully provided, it will save lots of time on information exchange.